Solvent-free one-pot synthesis of 4-aryl-3,5-dimethyl-1,4,7,8-tetrahydrodipyrazolo[3,4-b:4′,3′-e]pyridines using Fe3O4@SiO2@(BuSO3H)3 catalytic Fe3+ system as selective colorimetric

Research on Chemical Intermediates - The synthesis of 4-Aryl-(3,5-dimethyl-1,4,7,8-tetrahydro-dipyrazolo[3,4b:4′,3′e]pyridine derivatives was accomplished using Fe3O4@SiO2@(BuSO3H)3...     

Theoretical studies on tautomerism of imidazole-2-selenone

The tautomerism of all possible forms of imidazole selenone (ISe1–ISe6), induced by proton transfer was studied theoretically in different environments including gas phase, continuum solvent, and microhydrated environment with one explicit water molecule. The calculations were performed at the MP2 and CAM-B3LYP levels of theory, separately. It was found that the imidazole selenone, in the form of ISe3, is the most stable isomer in both gas phase and solvent. The activation energy for conversion of ISe3 to imidazole selenol (ISe6), as the second stable form, is 41.72 and 43.0 kcal/mol in the gas phase and water, respectively. The infrared spectral frequencies as well as the vibrational frequency shifts were reported and assigned to their corresponding vibrational modes. In addition, the variation of dipole moments and charges on the atoms with change of solvent was studied. The energies of HOMO, LUMO, and HOMO–LUMO gap were calculated in both gas phase and solvent. Specific solvent effects with addition of water molecule near the electrophilic centers of tautomers and the transition states of proton transfer, assisted by water molecule, were investigated. It was found that the water molecule can form different hydrogen bonds with the molecule. Aggregation of the isomers with water molecule does not change the order of stability of isomers, but proton transfer reaction assisted by a water molecule needs less energy than when the proton shifts through the intramolecular process.     

Characterization of Chitosan/Alginate Self-Assembled Nanoparticles as a Protein Carrier

The aim of this study was to evaluate the effect of the polymeric ratios on the characteristics of chitosan/alginate (ch/alg) self-assembled nanoparticles and their potential as protein delivery vehicle. The nanoparticles were prepared using proper mixing of polymers in presence or absence of bovine serum albumin (BSA) as a protein model. Three formulations of nanoparticles comprising ch/alg ratios of 2:1, 1:1, and 1:2 were prepared. Size, shape and zeta potential of the formulations were studied by scanning electron microscopy (SEM) and nanosizer instruments. FTIR, and differential scanning calorimetery (DSC) studies were performed to investigate polymer-polymer or polymer-protein interactions. Release profiles and entrapment efficiencies of the nanoparticles were determined by calorimetric technique using appropriate techniques. Entrapment efficiency was 70% for ch/alg ratio of 1:1, 65% for 1:2, and 60% for 2:1. The z-average size of the nanoparticles were 403, 205, and 318 nm for ch/alg ratios of 2:1, 1:1, and 1:2, respectively. Average zeta potentials were ?47, +15, ?25 mV for 2:1, 1:1, and 1:2 as well. Considering the favorable features required for protein delivery systems, ch/alg (1:1) due to its smallest size, highest loading, and most homogenous shape was regarded as the best ratio.     

Kinetic Study of Radical Polymerization VIII. A Comprehensive Study of Solution Copolymerization of Vinyl Acetate and Methyl Acrylate by 1H‐NMR Spectroscopy

Radical copolymerization reaction of vinyl acetate (VA) and methyl acrylate (MA) was performed in a solution of benzene‐d₆ using benzoyl peroxide (BPO) as the initiator at 60°C. Kinetic studies of this copolymerization reaction were investigated by on‐line ¹H‐NMR spectroscopy. Individual monomer conversions vs. reaction time, which was followed by this technique, were used to calculate the overall monomer conversion, as well as the monomer mixture and the copolymer compositions as a function of time. Monomer reactivity ratios were calculated by various linear and nonlinear terminal models and also by simplified penultimate model with r _2(VA)=0 at low and medium/high conversions. Overall rate coefficient of copolymerization was calculated from the overall monomer conversion vs. time data and k _p  . k _t ^?0.5 was then estimated. It was observed that k _p  . k _t ^?0.5 increases with increasing the mole fraction of MA in the initial feed, indicating the increase in the polymerization rate with increasing MA concentration in the initial monomer mixture. The effect of mole fraction of MA in the initial monomer mixture on the drifts in the monomer mixture and copolymer compositions with reaction progress was also evaluated experimentally and theoretically.     

Kinetic Study of Radical Polymerization v. Determination of Reactivity Ratio in Copolymerization of Acrylonitrile and Itaconic Acid by 1H‐NMR

Many reports exist in the literature about the application of ¹H and ¹³C‐NMR techniques to analyze the copolymer structure and composition and also determination of reactivity ratios. In this work, on‐line ¹H‐NMR spectroscopy has been applied to identify reactivity ratios of itaconic acid and acrylonitrile in the solution phase (DMSO as the solvent) and in the presence of AIBN as the radical initiator. All the peaks corresponding to the existing protons were assigned quietly. Therefore, the kinetics of the copolymerization reaction was investigated by studying the variation of integral of two characteristic peaks regarding each monomer. The obtained data were used to find the reactivity ratios of acrylonitrile and itaconic acid by linear least‐squares methods such as Finemann‐Ross, inverted Finemann‐Ross, Mayo‐Lewis, Kelen‐Tudos, extended Kelen‐Tudos and Mao‐Huglin. In addition, a non‐linear least‐square method (Tidwell‐ Mortimer) was used at low conversions. Extended Kelen‐ Tudos and Mao‐Huglin were applied to determine reactivity ratio values at high conversions as well.     

Modified dispersive liquid-liquid microextraction for pre-concentration of benzene, toluene, ethylbenzene and xylenes prior to their determination by GC

We have developed a modified method for the extraction and preconcentration of benzene, toluene, ethylbenzene and xylenes (BTEX) in aqueous samples. It based on dispersive liquid-liquid microextraction along with solidification of floating organic microdrops. The dispersion of microvolumes of an extracting solvent into the aqueous occurs without dispersive solvent. Various parameters have been optimized. BTEX were quantified via GC with FID detection. Under optimized conditions, the preconcentration factors range from 301 to 514, extraction efficiencies from 60 to 103 %, repeatabilities from 2.2 to 4.1 %, and intermediate precisions from 3.5 to 7.0 %. The relative recovery for each analyte in water samples at three spiking levels is >85.6 %, with a relative standard deviation of <7.4 %.

Quantum chemical study of the nature of interactions between the boraphosphinine and alumaphosphinine with some of the mono- and divalent cations: cation–π or cation–lone pair?

Structural Chemistry - Quantum chemical study of the nature of interactions between the boraphosphinine (BP) and alumaphosphinine (AlP) with some of the alkali metal cations (Li+, Na+, K+) and...     

Three-Component Reaction of Triphenylphosphine,Dimethyl Acetylenedicarboxylate,and Aldehyde Benzoylhydrazones: An Efficient One-Pot Synthesis of Stable Phosphorus Ylides

Protonation of the reactive 1:1 intermediate produced in the reaction between dimethyl acetylenedicarboxylate and triphenylphosphine by benzoylhydrazones leads to vinylphosphonium salts, which undergo Michael addition with the conjugate base of the NH acid to produce highly fanctionalized, salt-free phosphorus ylides in excellent yields.     

Synthesis of novel fluorene-functionalised nanoporous silica and its luminescence behaviour in acidic media

Fluorene-functionalised nanoporous silica (FL-NH₂-SBA-15) was prepared using the post-synthesis grafting method of SBA-15. The material thus obtained was characterised by means of small- and wide-angle X-ray diffraction, nitrogen adsorption-desorption, Fourier transform infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, and elemental analysis. The results showed that the organised structure is preserved after the post-grafting procedure. Surface area and pore-size decreased by attaching functional groups to the pore surface. In addition, the pore volume was reduced with functionalisation. The amount of fluorene grafted onto the surface of SBA-15 was 0.55 mmol with a yield of approximately 46 %. The emission spectra of FL-NH₂-SBA-15 in acidic media were studied and are discussed in detail. The structural change between FL-NH₂-SBA-15 and the protonated form might be an effective candidate for acid-dependent molecular-sensor models for advanced application in molecular sensors in the future.